Manufacturers and Distributors
Your Role Under the BSA
Manufacturers and distributors have a critical role in building safety. Under the BSA, supplying the wrong product or an unsafe product, or failing to provide traceable information, risks enforcement action. Current regulations are widespread and expected to grow significantly off the back of the proposals listed in the Construction Products Reform Green Paper. NFRC will keep Members updated on regulatory changes as they are unveiled.
The Building Safety Act 2022 is intended to secure the safety of people in and around all buildings irrespective of their height and to improve the standard of buildings. The Act impacts all levels of the industry, imposing wide-ranging new duties designed to increase the accountability, transparency, and oversight of all industry participants and also the construction and development of higher-risk buildings. As manufacturers and distributors of construction products, your responsibilities include product safety, documentation, traceability, and reporting.
As manufacturers and distributors of construction products, your responsibilities include product safety, documentation, traceability, and reporting.
The Gateway Approach
The BSA creates a new Building Safety Regulator (BSR) charged with specific objectives and a series of duties regarding building safety. You can read more about the role of the BSR here.
It is an offence to provide false or misleading information to the BSR punishable by up to 2 years imprisonment, a fine and/or both.
A new Gateway Approach has been introduced to ensure building safety is considered at each stage of a building’s design and construction and to create a ‘golden thread’ of information.
Gateway One
Gateway Two
- Occurs prior to construction work beginning on site.
- An application will be made to the BSR with full design intentions.
- Building work cannot begin until the BSR is satisfied the design meets the functional requirements of the building regulations.
- This provides a “hard stop” if the BSR is not satisfied.
- Product manufacturers will be required to fully back the early product details made in Gateway Oone. Substitutions will also be fully scrutinised so supply of the products referenced earlier will be essential or full proof of performance equivalence will be required. There will be pressure to ensure specified products can be delivered or substitutions with proven performance are available.
Gateway Three
- Once the building work is complete, the BSR will assess whether the work has been carried out in accordance with building regulations and information has been provided to the Accountable Person. If satisfied, the BSR issues the contractor with a completion certificate. If not satisfied, the building cannot be registered with the BSR (another ‘hard stop’).
- Registration with the BSR is required before occupancy of the building is permitted.
- At this point all golden thread documents must be handed over to the new building owner.
- It will be permissible for prescribed appointments or appointed persons to be made for any work and that such persons will have duties imposed on them to ensure compliance with building regulations. The skills, knowledge, experience, behaviour of such persons and the capability of organisations is still to be defined.
Product Safety & Performance
Design, testing and quality control
You must ensure that all construction products:
- Are designed and manufactured to meet performance standards
- Have passed relevant fire, load, durability, or weather tests
- Comply with regulatory marking
If you supply or promote a product, you are liable if it’s not safe or if claims made are misleading.
Recordkeeping & Labelling
What must follow the product (digitally)
All safety-critical products must be supplied with:
- A unique identifier (e.g. batch number, QR code)
- DoP and test certificates
- Installation instructions
- Limits of use or approval scope
For complex systems (e.g. fire-rated cladding), this info should be accessible digitally, either via a platform, email, or scanable link.
How long to retain technical/batch info
Suppliers must retain records for at least 15 years, and up to 30 years for materials used in HRBs. This includes:
- Technical datasheets
- Product change logs
- Batch and distribution records
The Code for Construction Product Information (CCPI)
Incident & Risk Reporting
How and when to notify OPSS
If you become aware of a safety issue with a product you manufacture or supply, you must report it to the Office for Product Safety and Standards (OPSS).
This includes:
- Safety defects in fire performance
- Product recalls or failures in the field
- Misuse or misapplication that poses a risk
You are also expected to take immediate action to warn downstream users and remove unsafe stock.
Enforcement powers of the BSR and OPSS
- Conduct audits and inspections
- Impose stop notices or product recalls
- Refer individuals or companies for prosecution
Organisational Competence
Named Responsible Person
CPD for your technical/sales teams
Your sales and technical staff must understand the products they promote—including limitations of use and any updates to regulations. Regular CPD or product training is advised and may be requested during audits.
Further information on individual competence can be found here.
Legal Consequences
Recall orders, stop-sale notices
If your product is found to be unsafe, regulators can:
- Order a full recall (even from stockists or sites).
- Ban the sale of the product until issues are resolved.
- Demand updated testing before resuming sales.
Unlimited fines and criminal liability
Knowingly supplying unsafe or mislabelled products can lead to unlimited fines, director disqualification, and criminal charges. The BSA makes clear that suppliers are not immune from liability.
New liabilities for manufacturers and distributors
- There is a new liability applying to manufacturers and distributors of construction products to be held accountable where the product used in works causes or contributes to a dwelling being unfit for habitation.
- This applies retrospectively for cladding products only and where the relevant products are in breach of regulations, inherently defective or have been mis-sold.
- There is the prospect that this could apply to all construction products in the future.
Liability in damages for defective construction products is imposed on:
- Anyone failing to comply with a construction product requirement covering a construction product.
- Anyone marketing or supplying construction products if they make a misleading statement (emphasising the benefits of the CCPI).
- Anyone who manufactures a construction product which is defective provided the product is installed, applied or attached to a relevant building and that building is unfit for habitation upon completion.